Author
|
Topic: how to quote a message?
|
ApostateAbe
Member (Idle past 3457 days) Posts: 175 From: Klamath Falls, OR Joined: 02-02-2005
|
|
Message 1 of 35 (600528)
01-15-2011 12:27 AM
|
|
|
In order to quote another poster, I have been copying the text and putting it within quote tags. On all other forums, there is a "quote" button below a person's message so I can push that button to quickly quote the message in a reply while keeping all of the formatting. Can I not do that here, or is there something I am just not seeing?
Replies to this message: | | Message 2 by Huntard, posted 01-15-2011 1:46 AM | | ApostateAbe has responded | | Message 4 by jar, posted 01-15-2011 10:18 AM | | ApostateAbe has not yet responded |
|
Huntard
Member (Idle past 1125 days) Posts: 2870 From: Limburg, The Netherlands Joined: 09-02-2008
|
How to quote
Hello ApostateAbe, to see how I did this, press the "peek" button on the bottom right of the post. Leave out the =ApostateAbe to get a "normal" quotebox. ApostateAbe writes: In order to quote another poster, I have been copying the text and putting it within quote tags. On all other forums, there is a "quote" button below a person's message so I can push that button to quickly quote the message in a reply while keeping all of the formatting. Can I not do that here, or is there something I am just not seeing? |
No you can't, you'll have to do it manually. But typing those 4 or 5 characters extra doesn't matter that much, does it? I think Percy (he writes all the software for this board) will probably someday add buttons for that, but when, is of course hard to say.
This message is a reply to: | | Message 1 by ApostateAbe, posted 01-15-2011 12:27 AM | | ApostateAbe has responded |
Replies to this message: | | Message 3 by Panda, posted 01-15-2011 5:49 AM | | Huntard has not yet responded | | Message 5 by ApostateAbe, posted 01-15-2011 10:27 AM | | Huntard has not yet responded |
|
Panda
Member (Idle past 2542 days) Posts: 2688 From: UK Joined: 10-04-2010
|
|
Message 3 of 35 (600544)
01-15-2011 5:49 AM
|
Reply to: Message 2 by Huntard 01-15-2011 1:46 AM
|
|
Re: How to quote
Huntard writes: I think Percy (he writes all the software for this board) will probably someday add buttons for that, but when, is of course hard to say. |
From what I recall, the buttons are absent on purpose, to avoid people having quotes within quotes within quotes within....etc. which can quickly clutter a thread.
This message is a reply to: | | Message 2 by Huntard, posted 01-15-2011 1:46 AM | | Huntard has not yet responded |
Replies to this message: | | Message 6 by ApostateAbe, posted 01-15-2011 10:34 AM | | Panda has acknowledged this reply |
|
jar
Member Posts: 33257 From: Texas!! Joined: 04-20-2004 Member Rating: 4.6
|
The quote buttons have been intentionally removed. Anyone so limited that they can only spell a word one way is severely handicapped!
This message is a reply to: | | Message 1 by ApostateAbe, posted 01-15-2011 12:27 AM | | ApostateAbe has not yet responded |
|
ApostateAbe
Member (Idle past 3457 days) Posts: 175 From: Klamath Falls, OR Joined: 02-02-2005
|
|
Message 5 of 35 (600567)
01-15-2011 10:27 AM
|
Reply to: Message 2 by Huntard 01-15-2011 1:46 AM
|
|
Re: How to quote
Huntard writes: Hello ApostateAbe, to see how I did this, press the "peek" button on the bottom right of the post. Leave out the =ApostateAbe to get a "normal" quotebox. ApostateAbe writes: In order to quote another poster, I have been copying the text and putting it within quote tags. On all other forums, there is a "quote" button below a person's message so I can push that button to quickly quote the message in a reply while keeping all of the formatting. Can I not do that here, or is there something I am just not seeing?
|
No you can't, you'll have to do it manually. But typing those 4 or 5 characters extra doesn't matter that much, does it? I think Percy (he writes all the software for this board) will probably someday add buttons for that, but when, is of course hard to say. |
Thanks, that helped.
This message is a reply to: | | Message 2 by Huntard, posted 01-15-2011 1:46 AM | | Huntard has not yet responded |
|
ApostateAbe
Member (Idle past 3457 days) Posts: 175 From: Klamath Falls, OR Joined: 02-02-2005
(1)
|
|
|
|
|
Message 6 of 35 (600568)
01-15-2011 10:34 AM
|
Reply to: Message 3 by Panda 01-15-2011 5:49 AM
|
|
Re: How to quote
Panda writes:Huntard writes: I think Percy (he writes all the software for this board) will probably someday add buttons for that, but when, is of course hard to say. |
From what I recall, the buttons are absent on purpose, to avoid people having quotes within quotes within quotes within....etc. which can quickly clutter a thread. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Probably a wise decision.
This message is a reply to: | | Message 3 by Panda, posted 01-15-2011 5:49 AM | | Panda has acknowledged this reply |
Replies to this message: | | Message 7 by Admin, posted 01-15-2011 11:13 AM | | ApostateAbe has not yet responded |
|
Admin
Director Posts: 12715 From: EvC Forum Joined: 06-14-2002
|
Re: How to quote
ApostateAbe writes:Panda writes:Huntard writes: I think Percy (he writes all the software for this board) will probably someday add buttons for that, but when, is of course hard to say. |
From what I recall, the buttons are absent on purpose, to avoid people having quotes within quotes within quotes within....etc. which can quickly clutter a thread. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Probably a wise decision. |
Yes, that's part of it. The big problem was that in any discussion involving long posts, which are common here, too often people would click the reply/quote button without trimming any text, and after a chain of just a few replies messages would quickly become prohibitively long. The reply/quote button is disabled through the control panel, but I've just enabled it so people can prove they're more disciplined now, but I'm sure Adminnemooseus will disable it again at the first abuse he sees. A planned feature is to be able to select text, then click a button to have it automatically quoted.
-- | Percy | | EvC Forum Director |
This message is a reply to: | | Message 6 by ApostateAbe, posted 01-15-2011 10:34 AM | | ApostateAbe has not yet responded |
|
jar
Member Posts: 33257 From: Texas!! Joined: 04-20-2004 Member Rating: 4.6
|
|
Message 8 of 35 (600575)
01-15-2011 11:15 AM
|
Reply to: Message 7 by Admin 01-15-2011 11:13 AM
|
|
Re: How to quote
Admin writes:ApostateAbe writes:Panda writes:Huntard writes: I think Percy (he writes all the software for this board) will probably someday add buttons for that, but when, is of course hard to say. |
From what I recall, the buttons are absent on purpose, to avoid people having quotes within quotes within quotes within....etc. which can quickly clutter a thread. | Probably a wise decision. |
Yes, that's part of it. The big problem was that in any discussion involving long posts, which are common here, too often people would click the reply/quote button without trimming any text, and after a chain of just a few replies messages would quickly become prohibitively long. The reply/quote button is disabled through the control panel, but I've just enabled it so people can prove they're more disciplined now, but I'm sure Adminnemooseus will disable it again at the first abuse he sees. A planned feature is to be able to select text, then click a button to have it automatically quoted. |
And, with minimal effort it can be used. Percy, also consider a limit of say three or four nested quotes. Anyone so limited that they can only spell a word one way is severely handicapped!
This message is a reply to: | | Message 7 by Admin, posted 01-15-2011 11:13 AM | | Admin has acknowledged this reply |
|
Huntard
Member (Idle past 1125 days) Posts: 2870 From: Limburg, The Netherlands Joined: 09-02-2008
|
|
Message 9 of 35 (600585)
01-15-2011 12:50 PM
|
Reply to: Message 7 by Admin 01-15-2011 11:13 AM
|
|
Re: How to quote
Well, I don't think it's necessary to include a "reply-quote" button. You could however include a button where you could highlight some text in the message you're replying to, and when you click that button it makes it a quotebox. Not that I would need such a thing, but that could perhaps speed up the quoting process.
This message is a reply to: | | Message 7 by Admin, posted 01-15-2011 11:13 AM | | Admin has acknowledged this reply |
|
Huntard
Member (Idle past 1125 days) Posts: 2870 From: Limburg, The Netherlands Joined: 09-02-2008
|
|
Message 10 of 35 (600586)
01-15-2011 12:52 PM
|
Reply to: Message 8 by jar 01-15-2011 11:15 AM
|
|
Re: How to quote
jar writes: Percy, also consider a limit of say three or four nested quotes. |
Please no, that would seriously cramp my style of replying. Yes there might be a lot of quoting in the messages, but I feel that is necessary. I like to be thorough, that's all.
This message is a reply to: | | Message 8 by jar, posted 01-15-2011 11:15 AM | | jar has responded |
Replies to this message: | | Message 11 by jar, posted 01-15-2011 12:53 PM | | Huntard has responded |
|
jar
Member Posts: 33257 From: Texas!! Joined: 04-20-2004 Member Rating: 4.6
|
|
Message 11 of 35 (600587)
01-15-2011 12:53 PM
|
Reply to: Message 10 by Huntard 01-15-2011 12:52 PM
|
|
Re: How to quote
Huntard writes:jar writes: Percy, also consider a limit of say three or four nested quotes. |
Please no, that would seriously cramp my style of replying. Yes there might be a lot of quoting in the messages, but I feel that is necessary. I like to be thorough, that's all.  |
Note the word nested. Anyone so limited that they can only spell a word one way is severely handicapped!
This message is a reply to: | | Message 10 by Huntard, posted 01-15-2011 12:52 PM | | Huntard has responded |
Replies to this message: | | Message 12 by Huntard, posted 01-15-2011 12:59 PM | | jar has acknowledged this reply |
|
Huntard
Member (Idle past 1125 days) Posts: 2870 From: Limburg, The Netherlands Joined: 09-02-2008
|
|
Message 12 of 35 (600590)
01-15-2011 12:59 PM
|
Reply to: Message 11 by jar 01-15-2011 12:53 PM
|
|
Re: How to quote
jar writes: Note the word nested. |
Ah! I think I misunderstood, with nested you mean a quote within a quote within a quote within a quote and so on, yes? Then I agree. I thought you meant 4 quotes per post total.
This message is a reply to: | | Message 11 by jar, posted 01-15-2011 12:53 PM | | jar has acknowledged this reply |
|
ApostateAbe
Member (Idle past 3457 days) Posts: 175 From: Klamath Falls, OR Joined: 02-02-2005
|
|
Message 13 of 35 (600614)
01-15-2011 4:02 PM
|
Reply to: Message 8 by jar 01-15-2011 11:15 AM
|
|
Re: How to quote
jar writes:Admin writes:ApostateAbe writes:Panda writes:Huntard writes: I think Percy (he writes all the software for this board) will probably someday add buttons for that, but when, is of course hard to say. |
From what I recall, the buttons are absent on purpose, to avoid people having quotes within quotes within quotes within....etc. which can quickly clutter a thread. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Probably a wise decision. |
Yes, that's part of it. The big problem was that in any discussion involving long posts, which are common here, too often people would click the reply/quote button without trimming any text, and after a chain of just a few replies messages would quickly become prohibitively long. The reply/quote button is disabled through the control panel, but I've just enabled it so people can prove they're more disciplined now, but I'm sure Adminnemooseus will disable it again at the first abuse he sees. A planned feature is to be able to select text, then click a button to have it automatically quoted. |
And, with minimal effort it can be used. Percy, also consider a limit of say three or four nested quotes.SigAnyone so limited that they can only spell a word one way is severely handicapped! | You left out a few quote boxes, so I put them back in. There is now a button, "rquote," that does the reply with quote. The disadvantage at the moment is that it quotes signature in addition to the message. If I had a way to disable signatures, which are always annoying, maybe that wouldn't be such a problem.
This message is a reply to: | | Message 8 by jar, posted 01-15-2011 11:15 AM | | jar has acknowledged this reply |
Replies to this message: | | Message 14 by Admin, posted 01-15-2011 4:17 PM | | ApostateAbe has not yet responded |
|
Admin
Director Posts: 12715 From: EvC Forum Joined: 06-14-2002
|
Re: How to quote
ApostateAbe writes: There is now a button, "rquote," that does the reply with quote. The disadvantage at the moment is that it quotes signature in addition to the message. If I had a way to disable signatures, which are always annoying, maybe that wouldn't be such a problem. |
It's not supposed to be that way. I'll fix it soon. Edited by Admin, : Fix author of quote.
-- | Percy | | EvC Forum Director |
This message is a reply to: | | Message 13 by ApostateAbe, posted 01-15-2011 4:02 PM | | ApostateAbe has not yet responded |
Replies to this message: | | Message 20 by Huntard, posted 01-16-2011 3:17 AM | | Admin has acknowledged this reply |
|
Buzsaw
Inactive Member
|
|
Message 15 of 35 (600623)
01-15-2011 5:57 PM
|
Reply to: Message 7 by Admin 01-15-2011 11:13 AM
|
|
Re: Abuse Remedy
Admin writes: I'm sure Adminnemooseus will disable it again at the first abuse he sees. |
Perhaps the remedy would be warning/s followed by ever increased suspensions for repeat abusers as is the case with other violators of board policy. That way the baby wouldn't be thrown out with the bath water, so to speak.
BUZSAW B 4 U 2 C Y BUZ SAW. The Immeasurable Present Eternally Extends the Infinite Past And Infinitely Consumes The Eternal Future. Time Relates To What Is Temperal. What Is Eternal Is Timeless.
This message is a reply to: | | Message 7 by Admin, posted 01-15-2011 11:13 AM | | Admin has acknowledged this reply |
|